Double Fiber Glass Covered Copper Conductors (Dfgc)

Double Fiber Glass Covered Copper Conductors (Dfgc)

Application

Double Fiber Glass Insulated Copper Conductors (DFGC) are used for winding coils of Electric Motor Stators, Generators, Special Transformers and High Voltage Motors where high mechanical strength & high insulation properties are required. Fibre Glass Covered Conductor is bonded with a Varnish for dielectric strength to improve mechanical properties.

Size Range - Rectangular (Strip)

Width

4 mm to 16 mm

Thickness

1 mm to 5 mm

Insulation Range

0.175 mm (radial covering)  to  0.25 mm (radial covering)

Type of Insulating Material & Specification

Insulation Detail

Type of Insulation

Min. BDV (r.m.s) in Volts

Single / Double layer Fibre Glass Yarn, impregnated with “F” / “H” & “C” class Varnish on Bare Conductor

Single Covering (Gr.1)

350 V

Double Covering (Gr. 2)

560 V

Grade 2 Enamelled Conductor with

Single Covering with Gr. 2 enamelled (Gr.1)

1500 V

Double Covering with Gr.2 enamelled (Gr. 2)

2000 V

Applicable Indian Standards

IEC- 60317 (Part-0/Sec-4) / IS-13730 (Part-0/Sec-4), IS 13730 (PART 31) DFGC H-class, IS 13730 (part 32) DFGC F-Class, IS 13730 (PART 33) DFGC Temp Index 200

Indian Standards for Nomex Insulated Copper Conductor

DFGC_1stPage-188x300

IS 13730 (Part-0/Sec-4)

IS-13730-PART-31-DFGC-H-c-214x300

IS 13730 (PART 31) DFGC H-class

IS-13730-part-32-DFGC-F-C-1-190x300

IS 13730 (part 32) DFGC F-Class

IS-13730-PART-33-DFGC-Tem-1-199x300

IS 13730 (PART 33) DFGC Temp Index 200